位置修正技术在航位推算中的应用

利用图解法证明了航位推算轨迹和真实轨迹相似,符合相似性原理,并通过图解法推导位置修正公式;将位置修正技术用于里程仪的初始标定,经实测数据证明标定后的航向安装偏差角、俯仰安装偏差角及里程仪刻度系数误差大幅减小;将位置修正技术与GPS结合进行GPS/DR组合导航,经Matlab仿真证明该组合导航在长距离行车可将航向误差角限制在3.6′之内;该修正技术具有较高的实际应用价值。     

三轴光纤陀螺复用方案的初步探讨

分析了三轴光纤陀螺组合技术方案的光路和电路结构,设计了一种三轴光纤陀螺时分复用方案,对比了试验样机分时与不分时的性能指标．     

基于AdaBoost-SVM算法的某火炮炮闩技术状态评估

针对现役装备技术状态评估多依赖于手工拆卸的现状,提出一种基于AdaBoost-SVM模式识别算法的在线技术状态评估方法。利用人工后坐在线检测设备对炮闩装置技术状态参数进行检测,在对检测数据进行相关性分析特征提取的基础上,引入支持向量机模式识别方法,建立炮闩装置技术状态评估模型。通过将评估模型与Ada-Boost算法相结合,每次迭代都根据测试精度对分类错误的样本点和各分量分类器的权重重新赋值,在下一次迭代中形成新的分量分类器以优化分类结果,最终将各分量分类器依其权重综合完成评估。实例分析结果验证了评估模型的正确性和有效性。     

陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅰ）

基于对材料特性和防弹机理的认识,设计了由Al2O3陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合装甲板,并用现役127.mm穿甲燃烧弹进行靶试考核,检验靶板设计思路,结果表明：防护面密度为128 kg/m2的靶板可防住该弹。     

舰炮一维弹道修正弹射击误差分离和校正研究

由于工作原理不同,传统无控弹射击校正方法不适用于一维弹道修正弹。分析了舰炮使用一维弹道修正弹射击误差构成和射击观测特点,提出一维弹道修正弹射击校正新方法,首先通过修正机构不工作,利用观测弹着点相对预测弹着点偏差平均值校正火控设备预测弹着点误差;然后利用修正弹正常工作时观测弹着点相对目标（或提前点）偏差平均值校正修正机构误差。假设各误差值,通过解弹道方程仿真计算表明,按新方法射击校正能够显著提高射击精度。     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Damage mechanics and energy absorption capabilities of naturalfiber reinforced elastomeric based bio composite for sacrificial structural applications

The present study deals with the experimental, finite element (FE) and analytical assessment of low ballistic impact response of proposedflexible'green' composite make use of naturally available jute and rubber as the constituents of the composite with stacking sequences namely jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ). Ballistic impact tests were carried out by firing a conical projectile using a gas gun apparatus at lower range of ballistic impact regime. The ballistic impact response of the proposed flexible composites are assesses based on energy absorption and damage mechanism. Results revealed that inclusion of natural rubber aids in better energy ab-sorption and mitigating the failure of the proposed composite. Among the three different stacking se-quences of flexible composites considered, JRJRJ provides better ballistic performance compared to its counterparts. The damage study reveals that the main mechanism of failure involved in flexible com-posites is matrix tearing as opposed to matrix cracking in stiff composites indicating that the proposedflexible composites are free from catastrophic failure. Results obtained from experimental, FE and analytical approach pertaining to energy absorption and damage mechanism agree well with each other. The proposed flexible composites due to their exhibited energy absorption capabilities and damage mechanism are best suited as claddings for structural application subjected to impact with an aim of protecting the main structural component from being failed catastrophically.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

基于压力间断解析解对AUSM -up格式的修正*

AUSM -up格式是AUSM类系列格式中最完善的,通过在对流通量中引入压力耗散,同时在压力通量中引入速度耗散,使之在各种马赫数下均有良好的收敛性和稳定性。然而,通过对格式的分析,我们发现当马赫数为零时,在压力间断位置会出现质量通量无穷大的非物理现象。为了克服这一缺陷,采用特征线法获得了压力间断问题的解析解;以此为基础,对对流通量中的压力耗散项进行修正,发展出新的AUSM -up格式。以新的格式对不同速度驱动下的冲击波发展、不同强度压力间断问题和激波衍射问题进行了仿真,计算结果与理论解吻合得较好。